GW Instek GPT-9800 series User Manual - Manual (Page 17)

INTRODUCTION
17
Preparation
Voltage Line
Selection Before power is turned on,
ensure the line voltage is
correct for the environment.
The line voltage is shown on
the rear panel.
Voltage: 100/120/220/230V
±10% Frequency: 50~60Hz
120V
100V
220V
230V
Warning Ensure a three pronged grounded power socket is
used.
Fuse Ensure the correct fuse is used
before power up. (Fuse:
T0.4A/250V)
EUT AC Line In Before connecting power to the
EUT AC Line In, confirm the
EUT input power and test
requirements do not exceed the
EUT AC Line In requirements.
Voltage Range: 85V ~ 250V / 50
~ 60Hz
Caution * EUT : 10A(max), 1500VA(max)