GW Instek SPS Series - Manual (Page 2)

ii
FOR UNITED KINGDOM ONLY
NOTE
This lead/appliance must only
be wired by competent persons
WARNING
THIS APPLIANCE MUST BE
EARTHED
IMPORTANT
The wires in this lead are
coloured in accordance with
the following code:
Green/
Yellow: Earth
Blue : Neutral
Brown: Live
(Phase)
As the colours of the wires in main leads may not correspond with the colours marking
identified in your plug/appliance, proceed as follows:
The wire which is coloured Green & Yellow must be connected to the Earth terminal marke
with the letter E or by the earth symbol or coloured Green or Green & Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with th
Letter N or coloured Blue or Black.
The wire which is coloured Brown must be connected to the terminal marked with the letter
or P or coloured Brown or Red.
If in doubt, consult the instructions provided with the equipment or contact the supplier.
This cable/appliance should be protected by a suitably rated and approved HBC mains fuse;
refer to the rating information on the equipment and/or user instructions for details. As a
guide,
cable of 0.75mm ² should be protected by a 3A or 5A fuse. Larger conductors would norma
require 13A types, depending on the connection method used.
Any moulded mains connector that requires removal/replacement must be destroyed by rem
of any fuse & fuse carrier and disposed of immediately, as a plug with bared wires is hazard
if a engaged in live socket. Any re-wiring must be carried out in accordance with the inform
detailed on this label.