GW Instek GDS-3000 Series GCP-530/1030 current probe User Manual - Manual (Page 10)

GCP Series User Manual
10
WARNING
• Do not allow the device to get wet, and do not take
measurements with wet hands. This may cause an
electric shock.
• To avoid electric shock when measuring live lines,
wear appropriate protective gear, such as insulated
rubber gloves, boots and a safety helmet.
CAUTION
• To avoid damage to the device, protect it from
physical shock when transporting and handling.
Be especially careful to avoid physical shock from
dropping.
• This device should be installed and operated
indoors only, between 0 and 40°C (32 to 104°F) and
80% RH or less.
• Do not store or use the device where it could be
exposed to direct sunlight, high temperature or
humidity, or condensation. Under such conditions,
the device may be damaged and insulation may
deteriorate so that it no longer meets
specifications.
• This device is not designed to be entirely
waterproof or dustproof. To avoid damage, do not
use it in a wet or dusty environment.