AMT Datasouth 4600 - Manual (Page 68)

65
Appendix B: Stand-alone Keyboard and Barcode Reader
This appendix covers stand-alone operation with keyboard or barcode reader.
Keyboard
To use the printer in stand-alone operation with a keyboard follow the procedure
described below:
1. Make a form for the keyboar d. (The form should include “ZS” command to
store to flash memory. Refer to the following command sample.)
2. Turn on the printer; download the form from PC to printer.
3. Turn off the printer.
4. Connect the keyboard to the keyboard interface.
5. Turn on the printer.
6. Check LCD for instructions of each data string/ label count/ copies; type to
input data accordingly.
Form Control Functions
Key Function
Esc Enter or exit from keyboard mode
Backspace Delete the last typed character
F1 Next form if more than one form exists
Enter - Select the form
- End of typed data