AMT Datasouth 4600 - Manual (Page 13)

10
Basic Printer Features and Parameter Settings , PPLA/PPLB.
NOTE: Features can vary based on printer model. Do not change settings
during printing or communication.
Feature Parameter Factory Default Remarks
PRINT MODE Thermal transfer /
Direct thermal Thermal transfer
AUTO
CALIBRATE
MODE Mode 1~4 Mode 1 Calibrates on demand.
CUT/PEEL
OFFSET -015 ~+.050 0 Controls cut and peel
position.
TPH VERTICAL
OFFSET -
.003~+.003”
0 Offset of vertical print
position.
RECOVER
PRINT ENABLED,
DISABLED ENABLED Contents reprint after media
out or ribbon-out.
CUTER
INSTALLED YES
NO NO
PEELER
INSTALLED YES
NO NO
READER
INSTALLED YES
NO NO
WIN. CON. LIN. 0~254 0 Only under Windows with
bundled printer driver and
continuous media.
BASE SEED 0~4 ips 0 ips
COUNTING
DOWN UP
DOWN
DOWN
MEDIA
SENSOR TYPE GAP
BLACK BAR GAP Select for media
characteristics. Once
changed make sure to
calibrate before printing.
BACKFEED ENABLED
DISABLED DISABLED
PRESENT
DISTANCE .0~040” .87” Appears only when
BACKFEED enabled.
BASE
DARKNESS -028~+028 0
BAUD RATE
(RS232) 600 / 1200 / 2400/
4800 / 9600 /
19200 /NONE 9600