AMT Datasouth 4600 - Manual (Page 12)

9
Changing Settings from the Panel
You may change settings using the front panel buttons of the 4600 PLUS series
printer models. In addition you may also change settings via software Utility and
data stream commands.
Buttons Function
FEED+PAUSE Press to enter setting mode.
(Don‟t press over 1 second)
FEED+CANCEL Press to show next features.
CANCEL Press to select desired feature.
FEED+CANCEL To scroll through the list of values for the
chosen feature.
CANCEL To save the currently displayed value.
PAUSE To exit setup mode.
Setting Procedure:
To change settings using the buttons on the front panel:
1. Press PAUSE, verify mode on LCD display.
2. Press FEED and PAUSE at the same time to enter setup mode.
3. Press and hold FEED, use CANCEL to scroll through the list of features.
4. Press CANCEL to select desired feature.
5. Press and hold FEED, use CANCEL to scroll through the list of values for
the chosen feature.
6. Press CANCEL to save the currently displayed value.
7. Press PAUSE twice to exit setup mode and READY the printer.