AMT Datasouth 4600 User Manual

Page 41

1. Turn off the printer. Plug the power cable into the power socket on the wall,

and then connect the other end of the cable to printer's power socket.

Connect an interface cable (i.e USB, Parallel or Serial) from the printer to the

PC.

2. Turn on the printer. If the printer supports Plug-and-Play, and you have

successfully connected it using a USB cable, then the Windows Add

Hardware Wizard will automatically detect the printer and display a dialog that

allows you to install a driver. Click Cancel and do not install the driver using

the Windows Add Hardware Wizard. Instead use the Seagull Driver

Installation Wizard provided on the CD ROM received with your printer.

3. Utilizing the CD ROM from your printer package, select and start the Seagull

Driver Wizard.

On the prompt, Windows Printer Driver, select “I accept…” and click "Next".