AMT Datasouth 4600 - Manual (Page 14)

11
Feature Parameter Factory Default Remarks
PARITY
(RS232) NONE
EVEN
ODD
NONE
LENGTH
(RS232) 8 DATA BITS
7 DATA BITS
8 DATA BITS
CLEAR FLASH YES/NO NO
PRINTERS WITH ETHERNET
DHCP ENABLE
DISABLE ENABLE
IP ADDRESS ###.###.###.###
SUBNET MASK ###.###.###.###
DEFAULT
GATEWAY ###.###.###.###
MAC
ADDRESS ####.####.####
Printer Features and Parameter Settings, PAL/PPLZ
Feature Parameter Factory Default Remarks
PRINT MODE Thermal transfer /
Direct thermal Thermal transfer
AUTO
CALIBRATE
MODE Mode 1~4 Mode 1 Calibrates on demand.
CUT/PEEL
OFFSET -015 ~+.050 0 Controls cut and peel
position.
TPH VERTICAL
OFFSET -.003~+.003 ” 0 Offset of vertical print
position.
RECOVER
PRINT ENABLED,
DISABLED ENABLED Contents reprint after media
out or ribbon-out.