AMT Datasouth 4600 - Manual (Page 37)

34
Serial (RS-232) Port
The required cable must have a nine-pin "D" type male connector on one end,
which is plugged into the mating serial port located on the back of the printer. The
other end of the cable connects to a serial port on the host computer. For
technical and pin-out information, please refer to the Technical Reference in this
manual.
Note:
1. Centronics allows a much higher communication speed than serial.
2. The pin assignment of serial cable is different from PC.
Please contact your local reseller if you need
this cable.
Ethernet 10/100 Internal Printer Server Option
This connector is for Ethernet application; it is convenient to use several printers
by Ethernet connector at the same time.
Note:
When using Ethernet model printer, please wait till the
Ready Indicator to stop blinking, before starting printer
operations.