American Water Heater VG6250T100 - Manual (Page 44)

44
servIce contact InforMatIon
The control system has a discrete menu that Installing contractors and/or service agents can access to enter contact information for their
customers. This contact information will be displayed with all Fault and Alert messages.
descrIptIon/actIon dIsplaY
From the Desktop Screen press and hold down the middle
(unmarked) Operational Button for 30 seconds and then release it.
This will launch a discrete menu where personalized contact
information can be entered.
Using the UP and DOWN buttons select (highlighted in black) the
"Show Contact Information" menu item.
Press the Operational Button under "CHANGE" to activate the
adjustment mode for this parameter.
Show Contact Information No
Change Contact Name
Change Contact Phone
Current Contact Info:
(000) 000-0000
Access Code
CHANGE BACK HELP
Service Contact Information
With the adjustment mode for "Show Contact Information"
activated the selection bar will change from a black fill to a black
outline.
Use the Up and Down Buttons to change the setting from "No" to
"Yes" and press the Operational Button underneath "UPDATE" to
save the new setting.
note: The Access Code at the bottom of the Service Contact
Information screen is for manufacturing purposes only. There are
no user settings or information accessed through this menu item.
Show Contact Information Yes
Change Contact Name
Change Contact Phone
Current Contact Info:
(000) 000-0000
Access Code
UPDATE CANCEL
Service Contact Information
Using the UP and DOWN buttons select (highlighted in black) the
"Change Contact Name" menu item.
Press the Operational Button under "SELECT" to open the Change
Contact Name menu.
Show Contact Information Yes
Change Contact Name
Change Contact Phone
Current Contact Info:
(000) 000-0000
Access Code
SELECT BACK HELP
Service Contact Information
Follow the on screen instructions to enter your name or the name
of your company. There is a maximum of 20 character spaces for
this purpose.
When finished press the Operational Button "UPDATE" to save the
new Contact Name. The control system will return to the discrete
menu.
Enter the service contact below:
NAME: _
Use the > and < keys to move between
characters. Use the UP and DOWN keys to
change the character.
- -
< >
UPDATE
- -
Using the UP and DOWN buttons select (highlighted in black) the
"Change Contact Phone" menu item and press the Operational
Button under "SELECT".
Follow the on screen instructions to enter a new Contact Phone
number and press the Operational Button under "UPDATE" to save
the new phone number.
When the new Contact Name and Contact Phone number have
both been updated, press the Operational Button under "BACK" to
return to the Desktop screen.
BACK HELP
Show Contact Information Yes
Change Contact Name
Change Contact Phone
Current Contact Info:
YOUR COMPANY NAME HERE
(123) 456-7890
Access Code
Service Contact Information