Detcon 880S-N4X - Manual (Page 22)

880-N4X
880-N4X Instruction Manual Rev. 0.0 Page 18 of 36
Figure 30 Inputting the number of channels
) Select the “EXIT” box to exit the “System Configuration Screen” and return to the “Main Screen”.
) Each channel must be set up with the correct parameters for each sensor. Using the wand to select a
5
6
channel from the “Main Screen” will open that channels corresponding “Channel X Details Screen”
(Figure 31).
Figure 31 Channel Detail Screen
) The Model 880 is set up for RS-485 Modbus™ communication. All communications with the sensors are 7
accomplished through the RS-485 communications Protocols. Set up for Serial Sensors (Model 880S) is
different from the set up for Analog Sensors (Model 880A) using the DA4 Modules: