Detcon 880S-N4X - Manual (Page 20)

880-N4X
880-N4X Instruction Manual Rev. 0.0 Page 16 of 36
4.3 880 Setup
1) From the “Main Screen” (Figure 26), enter the “System Configuration Screen” by touching the “System
Configuration” box with the wand.
Figure 26 Main Screen
2) The display will prompt for a password to enter the 880 “System Configuration Screen”. The default
password is “1234”. Enter the password in the Pop-Up Screen and press enter to continue. This will open
the “System Configuration Screen” (Figure 27 – Analog, Figure 28 - Serial).
Figure 27 Analog Configuration Screen
NOTE: The System Configuration Screens differ only slightly between the Analog and Serial units.