Detcon 1000_CO2 - Manual (Page 28)

Model 1000 CO2
Model 1000 CO2 Instruction Manual Rev. 2.2 Page 24 of 28
14.0 Warranty
Detcon Inc., as manufacturer, warrants under intended normal use each new Model 1000 Series H
2
S Process
Analyzer gas detection system to be free from defects in material and workmanship for a period of one year
from the date of shipment to the original purchaser. All warranties and service policies are FOB the Detcon
Inc. facility located in The Woodlands, Texas.
Sensor Transmitter
Detcon, Inc., as manufacturer, warrants under intended normal use each new MicroSafe™ plug-in control
circuit to be free from defects in material and workmanship for a period of two years from the date of shipment
to the original purchaser.
Detcon, Inc., further provides for a five year fixed fee service policy wherein any failed transmitter shall be
repaired or replaced as is deemed necessary by Detcon, Inc., for a fixed fee of $65.00. The fixed fee service
policy shall affect any factory repair for the period following the two-year warranty and shall end five years
after expiration of the warranty. All warranties and service policies are FOB the Detcon facility located in The
Woodlands, Texas.
Terms & Conditions
™ The original serial number must be legible on each sensor element base.
™ Shipping point is FOB the Detcon factory.
™ Net payment is due within 30 days of invoice.
™ Detcon, Inc. reserves the right to refund the original purchase price in lieu of sensor replacement.
IR-640/IR-642 CO
2
Plug-in Sensor Warranty
Detcon, Inc., as manufacturer, warrants each plug-in optical sensor to be free from defects in material and
workmanship under intended normal use for a period of 5 years according to the following schedule:
2 Years No Charge
3rd 25% of replacement charge
4th 50% of replacement charge
5th 75% of replacement charge
Beyond 100%% of replacement charge