Detcon SmartWireless CX - Manual (Page 14)

Sentinel CX
Sentinel CX Sensor Station IM Rev. 1.4 Page 10 of 26
2. Safety Guidelines for safe use
If equipment is used in a manner not specified by Detcon, the protection provided by the equipment may be
impaired. It is mandatory to read and follow all of the Safety Warnings and Cautions listed below.
Warning
This apparatus is suitable for use in Class I, Division 2, Groups A,B,C,D, or unclassified locations.
Warning
Explosion Hazard. Do not make any disconnections while the circuit is live or
unless the area is known to be free of ignitable concentrations.
Warning
Charging of the internal Battery Pack shall never be done while equipment is
located in the Division 2 hazardous area. The equipment must be moved to a non-
hazardous are for the battery charging to take place.
The temperature during the
indoor battery charging shall be between 0 - 40C.
Warning
Explosion Hazard. Do not remove or replace the Lithium Ion Battery Pack unless
power has been disconnected or unless the area is known to be free of ignitable
concentrations.
Warning
Substitution of any component may impair suitability for Division 2 use.
Warning
Exposure to some chemicals may degrade the sealing properties of materials used
in the following devices used in this equipment; namely the Div2 Strobe, relay
contacts, and magnetic programming switches
Warning
All Turck connectors have dust/water sealing caps that are mandatory to be
installed on any connector that is not actively connected to a cable.
This is
required to maintain the safety rating of this device. These caps are tethered
adjacent to each of the connector fittings for convenient connection.
CAUTION
The user must consult this manual for more information about any location marked
with this symbol.
DANGER
Danger of electrical shock. User must ensure that power has been disconnected
prior to installation or servicing of the equipment.