Detcon FP-700 - Manual (Page 43)

Model FP-700
FP-700 Instruction Manual Rev. 3.0 Page 39 of 40
10. Revision Log
Revision Date Changes made Approval
2.0 02/29/2008 Previous issue N/A
2.1 04/25/2011 Removed Teflon note in section 2.5. Added Revision Log
Section 10.
LU
2.2 07/11/11 Adding Inrush current information to specifications, drawing for
aluminum condulet dimensional LU
2.3 04/16/12 Changed cable recommendation, updated the Modbus Register
Map LU
2.4 01/07/13 Updated ATEX approvals label, updated EN standards that
sensor assembly meets. Updated ATEX listing in specifications BM
2.5 04/02/13 Updated ATEX installation instructions regarding use of ring
terminal for earth ground using screw and lock-washer. Updated
guidelines for metric special fasteners used in 700 assembly BM
2.6 04/05/13 Added 0-50% LEL range LU
2.7 11/11/13 Updated approvals label, add information on 4-20mA problems BM
2.8 11/20/13 Correct Modbus™ Register Map LU
2.9 12/13/13 Updated Field Wiring Section BM
3.0 02/28/14 Update 4-20mA wiring and Specifications BM