DeFelsko PosiTector 200 v.3.1 Full Manual - Manual (Page 39)

39
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Technical Data Technical Data
200 B and C probes 200 D probe
PosiTector
200
Model
B/Std B/Adv C/Std C/Adv D/Std D/Adv
Measures total
thickness
X X X X X X
Measures
Individual Layers
X X X
Graphic Display X X X
Typical
Applications
Polymer coatings
on wood, plastic,
etc.
Coatings on
concrete,
fiberglass, etc.
Thick, soft coatings like
polyurea, asphaltic
neoprene, very thick
polymers, etc.
Range*
13 – 1000 microns
0.5 – 40 mils
50 – 3800 microns
2 – 150 mils
50 – 7600 microns
2 – 300 mils
Accuracy
+/- (2 microns + 3% of reading)
+/- (0.1 mils + 3% of reading)
+/-(20um + 3% of reading)
+/- (1 mil + 3% of reading)
Minimum
Individual Layer
Thickness**
-
13
microns
0.5 mils
-
50
microns
2 mils
-
500
microns
20 mils
Thickness
Standard
DeFelsko STDA3 DeFelsko STDP6 DeFelsko STDP1
* Range limits apply to polymer coatings only.
** For multiple layer applications only. Dependent on material being measured.
Probe Details
Gage Size:
135 x 61 x 28 mm
(5.25” x 2.4” x 1.1”)
Weight:
140 g (4.9 oz.)
without batteries
Temperature Range:
0 to 40°C
(+32° to +104°F)
Conforms to: ASTM D6132 and ISO 2808