DeFelsko PosiTector 200 v.3.1 Full Manual - Manual (Page 15)

15
Cursor - The Cursor allows for further analysis of displayed
waveform. Use the (-)(+) buttons to move the green cursor line left
or right over the waveform. The thickness value is displayed at the
top right of the cursor line. This feature is particularly
useful in multi-layer applications where there are more than
3 distinct layers.
Screen Capture - Press to capture and save an image
copy of the current display. The last 10 screen captures are stored
in memory and can be accessed when connected to a computer
(See examples pg. 22 and PosiSoft USB Drive pg. 23).
Press and hold the (-)(+) buttons simultaneously to
capture any screen.
Menu - Press to access the Gage’s main menu.
Exit - Press to close the Graphics display. Press the Up
button to return to the Graphics display.
Use the navigation Up (move left) and Down (move right) buttons
to highlight icons on the graphic display.
Zoom - Visually magnifies the waveform of the displayed
peaks for more visibility. Pressing the (+) or (-) button repeatedly
will increase/decrease the zoom.
Set Range - Press the (-) or (+) buttons to adjust the
Gage’s Lo or Hi measuring range (See pg. 11 ).
Shortcut: