DeFelsko PosiTector 200 v.3.1 Full Manual - Manual (Page 16)

Advanced models of the PosiTector 200 are capable of
numerically displaying up to three individual layer thicknesses in a
multi-layer system.
From the Layers menu option...
Select up to three individual layer thickness values:
Edit:
- Edit Layer Names (up to 7 characters)
- Edit Layer Color (blue, green or red) - See Display, pg. 21.
Before setting up the Gage for multi-layer measurement, it is •
recommended that you first take measurements in single
layer mode and interpret the results using the Graphics option
(See pg. 14).
When a batch is Open, press the Up button to view the Batch
•
Chart.
16
NOTES:
Substrate
Layer 2
Total
thickness
Layers
(Advanced models only)
Layer 1
Couplant
Probe
Example:
Two Layer Application