Standard models – DeFelsko PosiTector 200 v.3.1 Full Manual User Manual
Page 18
18
Memory Management
Memory Management
Standard models
store up to 250 readings in one batch.
The Memory Menu includes the following options...
On: turns memory on and begins recording
Off: stops recording (stored readings remain in memory)
Clear:
removes all readings from memory
View: lists group statistics and all stored readings on the display.
It will begin by showing statistics based on all readings in
memory. Use the Up and Down buttons to scroll through all
readings. Press to exit.
Button functions with Memory ON:
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Create a new batch
(Advanced only)
Restore brightness
after dimming
(Advanced only)
The PosiTector 200 has internal memory storage for recording
measurement data. Stored measurements can be reviewed
on-screen or accessed via computers, tablets and smart phones.
Measurements are date and time-stamped.
Mean
(average)
Standard Deviation
# of readings
in memory
Minimum
measurement
Last
reading
Maximum
measurement
Standard Model display with Memory ON shows measurement
statistics: