DeFelsko PosiTector 200 v.3.1 Full Manual - Manual (Page 27)

27
When checked, any computer can view readings stored in memory
by navigating a virtual drive labeled “PosiTector” using the included
USB cable.
A formatted HTML report is viewed by selecting the "index.html" or
“START_HERE.html” file found in the root directory. Optionally, text
".txt" files located in each batch folder provide access to
measurement values. Stored readings and graphs can be viewed
or copied using universal PC/Mac web browsers or file explorers.
When your PosiTector is first connected to your Windows PC via
a USB cable, an enumeration process is started that installs device
drivers without re-booting your computer. You may see several
pop-up windows in the taskbar at the bottom right of your screen.
Wait for the entire process to be completed before proceeding.
When connected, power is supplied through the USB
cable. The batteries are not used and the body will not
automatically power down. If rechargeable (NiMH) batteries are
installed, the Gage will trickle charge the batteries.
NOTE: