COSA Xentaur COSA 707 - Manual (Page 50)

COSA Instruments USER MANUAL COSA 707
www.cosaxentaur.com 50
13.4.2 Export of Sites
OK
This function can be used for an analyzer back up or if you wish to supply the analyzer information
to a computer program or another analyzer. This is very handy if you have made some modifica-
tions inside the analyzer (site) for example if you have modified the phone number of a customer
and this modification needs to be updated in the computer software, or if a second analyzer needs
to have the same site information.
The File format ist the same as described above„Import of Sites“.
Only the file name is different, the file name will be ‚ANLxxxxx.csv’, in which the xxxxx are continu-
ing 5 digit numbers with leading zeros. If the file must be imported into another analyzer, the file
must first be renamed into “anlagen.csv”.
13.4.3 Export of Flue Gas Measurements
This function is used to export the measurements from the analyzer to a computer program.
Attention! This function is not suitable for back up or for the transfer to another analyzer because
the exported file can not be imported again!
The created file has the name ‚EMIxxxxx.csv’, in which the xxxxx are continuing 5 digit numbers
with leading zeros.
The created file has a column header with the following information: Site number, Date/Time,
Measuring program name, Fuel type, CO2max, O2reference, and all measured values that the
analyzer can measure as well as the soot numbers, Derivate and T-Boiler.
Example:
13.4.4 Export of Differential Pressure Measurements
The same function as under 13.4.3(Export of Flue Gas Measurements) only the file name is differ-
ent.
The created file has the file name “DDMxxxxx.csv“, in which the xxxxx are continuing 5 digit num-
bers with leading zeros.
The created file has a column header with the following information: Site number, Date/Time, as
well as 4 saved pressure measurements.