COSA Xentaur COSA 707 - Manual (Page 19)

COSA Instruments USER MANUAL COSA 707
www.cosaxentaur.com 19
inHg, PSI, of pressure.
LED condensate
trap 0 … 150 Change the brightness of the condensate separator LED
Helping hints ON / OFF Helpful hints activated or deactivated (explanation below)
Core flow search ON / OFF Core flow search before start of each flue gas measure-
ment: activated or deactivated
Switch-ON protec-
tion ON / OFF If activated and if ON key is pressed (possibly inad-
vertently), then the message „3 seconds OK key
press “ displays
Keyboard beeper ON / OFF Keyboard beeper activated or deactivated
Explanation for “Helping hints”:
Some helpful hints which are very useful for an inexperienced user but are not needed by experi-
enced users, can be activated or deactivated. The following hints will be affected:
“Zeroing finished, Sensors are ready. Analyzer ready for measurement.”
“Reminder! Charge batteries at regular intervals!”
“Measurement stopped/started.”
9.2.1 Switch-ON protection
If activated and if ON key is pressed then the message: „Switch-ON protection is activated – Press
OK for 3 seconds“ is displayed. Now press the OK botton on the centre of the keypad for three
seconds.
9.2.2 Setting printer type
F1
Printer type COSA / HP Select printertype
9.2.3 Bluetooth settings
F3