COSA Xentaur COSA 707 - Manual (Page 42)

COSA Instruments USER MANUAL COSA 707
www.cosaxentaur.com 42
12.16 Differential temperature measurement
In the differential temperature measurement menu two temperatures can be measured simultane-
ously by using the T1 and T2 connectors. Both measured temperatures and the difference be-
tween the temperatures will be displayed.
OK
Note:
The accuracy of the difference temperature measurement is guaranteed only on use of the
COSA temperature sensors.
12.17 External HC detector (optional)
The external HC-probe becomes at the AUX
socket (4) COSA 707 connected and uses for
the leakage detection
The red marking on the plug must agree with the red marking on the socket.
1 Sampling probe connection
Condensate separator
2 Pressure connection 1 (Draft)
3 Pressure connection 2
(Differential pressure)
4 Connector AUX (optional)
5 Temperature connection 1 /
T-Ambient air (combustion air)
6 Temperature connection 2 /
T-gas