COSA Xentaur COSA 707 User Manual
Page 38
COSA Instruments
USER MANUAL COSA 707
www.cosaxentaur.com
38
12.13 Last measurement results
The analyzer allows the viewing of the last measurement after a measurement is completed.
In the main menu “Measurement” select the point “last meas. values”.
The last values can be viewed, printed and/or saved.
OK F1
Above the F1 key “Start“instead of “Stop” is displayed. Pressing this key will continue the meas-
urement.
12.14 Pressure measurement
Pressure (4 values) is measured and saved to the selected measurement name. The actual meas-
ured value is displayed in the middle of the display. The 4 measurement names can be changed as
desired.
The hose on the draft + connector must be connected for draft measurements.
The second hose on the Delta P- connector must be connected for differential measurement.
OK
,
Select the measurement name 1-4
F1
Save the measured value to one of the measure-
ment name
F2
Zeroing the pressure sensor
F3
Change the name of the measurement category
ESC
Return to the measurement menu