APC SMARTSLOT DP300E - Manual (Page 21)

15
Installing Accessories continued
Daisy-chaining
the chassis with
other APC
accessories
If you need more than the three SmartSlot housings avail-
able with the Silcon Triple Chassis, or if you want to use
other external accessories, you can daisy-chain external
accessories together, provided that the total amperage of all
installed accessories—SmartSlot and external—does not
exceed the supplied amperage. (See “Powering the Silcon
Triple Chassis” on page 18.)
To add SmartSlot housings, you can daisy-chain the Silcon
Triple Chassis with standard Triple Chassis (AP9604)
accessories, installing the Silcon Triple Chassis closer to the
UPS.
Note: When daisy-chaining Triple Chassis units, you may
need to use a power adapter (see “Determining
power requirements: Table 3” on page 19).
Slot numbering
scheme
The SmartSlot accessory housings are numbered 1 to 3,
from left to right, as viewed from the rear of the chassis.
Continued on next page