APC SMARTSLOT DP300E - Manual (Page 12)

6
Mounting the Silcon Triple Chassis
Warning Do not operate the Silcon Triple Chassis where the condi-
tions are outside the limits listed in “Product specifications:
Table 5” on page 29.
Installation
options
You can install the Silcon Triple Chassis in one of three
ways:
• Place on a desktop.
• Mount in a NetShelter enclosure or other 19" rack.
• Mount on a wall.
For installation instructions, refer to the appropriate para-
graphs in this section.
Please recycle The shipping materials for the Silcon Triple Chassis are
recyclable. Please save them for later use or dispose of them
appropriately.
Placement on a
desktop
The Silcon Triple Chassis is equipped with rubber feet for
desktop use. To install on a desktop:
1 Choose a permanent location for the unit. It should
be located on a clean and level surface within 15
feet (5 m) of the communications port of the
UPS .
Make sure that the rear panel of the Triple Chassis
is accessible.
2 Continue with “Configuring via the Monitoring
Port” on page 10.
Continued on next page