Triton RT2000 X2 User Manual - Manual (Page 50)

C-4
M
ODEL
FT5000 (X2) U
SER
M
ANUAL
Each lock is shipped from the factory in Shelved Mode, operating on a standard combination (50-25-50).
E
NTERING THE
C
OMBINATION
1. Turn the dial left (CCW) until the letters “EC” (Enter Combination) appear on the LCD.
2. Enter the factory combination of 50-25-50 by sequentially pressing those six (6) buttons. The LCD
will display these numbers as they are entered.
3. When the combination has been correctly entered, the LCD will read “OPr”, meaning “OPen right”.
Turn the dial right (CW) until it stops. The locks bolt is now retracted and the lock is open.
4. After the lock is opened, the cabinet door may be opened.
11. Cnf - Enter New Combination - POC
Enter new combination again to confirm. POC (Pull Out Change key) willbe displayed.
12.
POC - Remove Change Key - EOP
Remove the change key. EOP (End OPeration) is displayed.
O
PERATING THE
E
LECTRONIC
L
OCK
(K
ABA
M
AS
)
10. EnF - Enter New Combination - Cnf
Select and enter the new combination. “CnF” (Confirm new Factory combination) will be displayed.
T
O CHANGE THE COMBINATION
:
1. Power Lock - EC
Turn the dial to the left (CCW) until “EC” (Enter Combination) is displayed.
2.
EC - Enter Shelved Mode Combination - OPr
Enter the current combination (either 50-25-50 or a changed combination) by sequentially pressing those
digits on the lock keypad. The numbers will be displayed on the LCD as they are entered.
3.
OPr - Retract Bolt
Turn the Dial to the right (CW) to retract the bolt
4.
Open Door
5. Insert Change Key
Insert the change key into the change key socket on the back of the lock.
6.
Extend Bolt
Turn the Dial to the left (CCW) to extend the bolt. Do not close the door
7.
Power Lock - EC
Turn the dial to the left (CCW) until EC (the Change Key symbol along with Enter Combination) is
displayed.
8.
EC - Press #8 - EcF
Press the “#” button followed by the “8” button. EcF (Enter combination,Factory) will be displayed.
9.
EcF - Enter Current Shelved Mode Combination - EnF
Enter the current shelved mode combination, “EnF” (Enter new Factory combination) will be displayed