Triton RT2000 X2 User Manual - Manual (Page 25)

2 1
C
ASSETTE
C
LOSE
/ C
ASH
R
EPLENISHMENT
L
OADING THE
C
URRENCY
C
ASSETTE
(
S
):
1. Unlock the cassette(s) and open the cassette lid using the supplied key. Move the pusher plate to the
rear of the cassette (toward the handle).
Unlock note cassette. Open the note cassette lid. Pull the packer back. Latched
in position using the key-lock.
2. Count the number of bills that remain in the cassette, if any. Next, count the number of bills that are being
added into the cassette.
3. Add the number of bills being placed into the cassette to the number that remained. The “Total” number
of these bills will be entered in the “E
NTER
C
ASSETTE
Q
UANTITY
” option. Place the currency into the
cassette between the pusher plate and front of cassette.
4. Hold the notes shown and turn the key-lock to release the catch. Allow the pusher plate to slowly
compress the notes.
5. Close and lock the cassette. Remove the key. Slide the cassette back into its compartment in the
dispensing mechanism. Make sure the cassette is fully inserted! You will feel the cassette latch
securely into the snap catches.
Load notes.