Triton RT2000 X2 User Manual - Manual (Page 30)

26
M
ODEL
RT2000 (X2) U
SER
M
ANUAL
This section of the manual covers preventive and corrective maintenance procedures appropriate for user
personnel. The following areas are covered:
I
NTRODUCTION
1. R
EPLENISHING
R
ECEIPT
P
APER
. Describes how to replace a
spent receipt paper roll.
2. C
LEANING THE
E
NCLOSURE
. The proper way to clean the ATM
housing.
3. C
ARD
R
EADER
C
LEANING
. The recommended card reader
cleaning technique.
*Important*
Only qualified service personnel
are authorized to repair or ser-
vice the terminal. Should a mal-
function occur, DO NOT attempt
to service the unit yourself! Con-
tact your Triton certified service
provider!
NOTE: This operation must be completed with the AC power applied to the ATM.
1. Open the rear cabinet sleeve door.
2. If paper remains on the roll, cut or tear the paper between the roll and the printer.
3. Remove the existing paper and spindle from the paper bracket.
R
EPLENISHING THE
R
ECEIPT
P
APER
Cut/tear paper. Remove paper roll/spindle.