Triton ARGO User Manual - Manual (Page 38)

34
ARGO U
SER
M
ANUAL
This section of the manual covers preventive and corrective maintenance procedures appropriate for user
personnel. The following areas are covered:
1. R
EPLENISHING
R
ECEIPT
P
APER
. Describes how to replace a spent receipt paper roll.
2. C
LEANING THE
E
NCLOSURE
. The proper way to clean the ATM housing.
3. C
ARD
R
EADER
C
LEANING
. The recommended card reader cleaning technique.
*IMPORTANT*
Only qualifi ed service personnel are authorized to repair
or service the terminal. Should a malfunction occur, DO
NOT attempt to service the unit yourself! Contact your
Triton certifi ed service provider!
NOTE: This operation must be completed with the AC power applied to the ATM.
1. Open the control panel by unlocking the top enclosure and pulling the hinged door forward.
2. If paper remains on the roll, cut or tear the paper between the roll and the printer.
3. Use the receipt printer fee d button to feed the paper
through the paper path until all paper comes out the
front of the printer.
** CAUTION **
DO NOT pull receipt paper back-
wards through the printer! This may
leave paper fragments that can cause
paper jams.
Cut paper between the roll and printer feed path.
I
NTRODUCTION
R
EPLENISHING THE
R
ECEIPT
P
APER
Paper feed button location