Triton ARGO User Manual - Manual (Page 27)

ARGO U
SER
M
ANUAL
23
3. Slide cassette onto the loading tray. Lift lid to expose the reject tray. Remove any rejected notes.
DO NOT recycle rejected notes!
4. Lift the reject tray. Push the packer plate to rear of
cassette and latch in place.
5. Count the number of bills that remain in the cassette,
if any. Count the number of bills that are being added
to the remaining notes. The total number of these bills
will be entered in the Enter Cassette Quantity prompt
(shown in step 6 of C
ASSETTE
C
LOSE
P
ROCEDURES
).
6. Place currency in the cassette and slowly release the
hold-back latch allowing the packer plate to move
forward against the notes. Close the cassette lid.
7. Remove cassette from loading tray. Insert the cassette
key and “PRIME” the cassette ( Green indicator). Install
the cassette into the dispenser.
8. Close and lock the security cabinet.
Cassette on
Loading Tray
Lid open to
expose Reject
Bin