LumaSense Technologies MCS640 Manual - Manual (Page 10)

6
Section 2 Introduction
2.2 Environmental Conditions
The MCS640 has an internal temperature sensor in the detector and is designed to
withstand ambient temperatures from 0°C to 50°C without a temperature-controlled
enclosure. The temperature reading can be displayed and read by image processing
software via the Gigabit Ethernet connection.
In addition to temperature requirements, other environmental factors must also be
considered when installing the MCS640 thermal imaging system. For example, if the
camera is going to be mounted in a harsh environment, certain precautions must be
taken to secure and protect the system from its surroundings.
Contact LumaSense for further information on environmental considerations and
protective enclosures for the MCS640 thermal imaging system.
2.3 Lenses
The MCS640 is a process camera that has a full array of optional lenses available to
meet the needs of most applications. However, because of the extreme and application-
specific nature of the camera system, it is necessary that the appropriate lens be fitted
and calibrated at the LumaSense Factory according to the application requirements.
Contact LumaSense for further information on lens considerations for the MCS640
thermal imaging system.
2.4 Camera Interfaces
The rear panel of the MCS640 supports connectors for the Gigabit Ethernet and DC
Power input.
DC power entry Connector
Gigabit ethernet Connector
Do not use thinners, ben-
zene or other chemicals
to clean the lens as these
will damage the lens
coating.