2 electrical connection, 3 limit of liability and warranty, 4 unpacking the instrument – LumaSense Technologies IS 12-Al/S User Manual
Page 6
IS 12 AI & IS 12-AI/S
General 6
Warning: To reduce the risk of injury to the eyes, do not look
directly into the targeting laser and do not point the targeting laser
into anyone's eyes. The instrument is equipped with a class II laser
that emits radiation.
Never look directly into the laser beam. The beam and spot can be watched
safely from side.
Make sure that the beam will not be reflected into eyes of people by mirrors or
shiny surfaces.
1.2.2 Electrical connection
Follow common safety regulations for main voltage (230 or 115 V AC) when connecting
additional devices. Touching the main voltage can be fatal. An incorrect connection and/or
mounting can cause serious health or material damages.
Only qualified specialists are allowed to connect such devices to the mains voltage.
1.3 Limit of liability and warranty
All general information and notes for handling, maintenance, and cleaning of this instrument
are offered according to the best of our knowledge and experience.
LumaSense Technologies is not liable for any damages that arise from the use of any examples
or processes mentioned in this manual or in case the content of this document should be
incomplete or incorrect. LumaSense Technologies reserves the right to revise this document and
to make changes from time to time in the content hereof without obligation to notify any
person or persons of such revisions or changes.
All instruments from LumaSense Technologies have a regionally effective warranty period.
Please check our website at
for up-to-date warranty
information. This warranty covers manufacturing defects and faults which arise during
operation, only if they are the result of defects caused by LumaSense Technologies.
The Windows compatible software was thoroughly tested on a wide range of Windows
operating systems and in several world languages. Nevertheless, there is always a possibility that
a Windows or PC configuration or some other unforeseen condition exists that would cause the
software not to run smoothly. The manufacturer assumes no responsibility or liability and will
not guarantee the performance of the software. Liability regarding any direct or indirect
damage caused by this software is excluded.
The warranty is VOID if the instrument is disassembled, tampered with, altered, or otherwise
damaged without prior written consent from LumaSense Technologies; or if considered by
LumaSense Technologies to be abused or used in abnormal conditions.
There are no user-serviceable components in the instrument:
No adjustments may be made to the targeting laser. It is fixed at the factory.
No adjustments may be made to the targeting laser's power level.
1.4 Unpacking the Instrument
Before shipment, each instrument is assembled, calibrated, and tested at the LumaSense Factory.
When unpacking and inspecting your system components, you need to do the following:
1. Check all materials in the container against the enclosed packing list.