LumaSense Technologies IS 12-Al/S - Manual (Page 12)

IS 12 AI & IS 12-AI/S Introduction 12
2.6 Accessories (Option)
Numerous accessories guarantee easy installation of the pyrometers. The following overview
shows a selection of suitable accessories. You can find the entire accessory program with all
reference numbers on no. Section 10.2 Reference numbers accessories.
Mounting
For mounting and aligning the pyrometer to the
measured object a mounting angle or ball and socket
mountings are available. The ball and socket
mounting is an easy way to align the pyrometer or
water cooling jacket (ball and socket mounting steel)
to the measured object. The quick-clamping-screws
of the ball and socket mounting enable an easy and
fast adjustment of the pyrometer in all directions.
ball and socket
mounting
ball and socket
mounting, steel
mounting
angle
Cooling
The pyrometer can be used in ambient temperatures
outside of the specifications if preventive
maintenance is taken.
The cooling plate is used to protect the pyrometer
from heat coming from the front. The completely
covered water cooling jacket made from stainless
steel protects the pyrometer if exposed to a hot
environment. It is designed for ambient
temperatures up to 180 °C.
water cooling jacket
cooling plate
Miscellaneous
The air purge protects the lens from contamination
with dust and moisture. It has to be supplied with dry
and oil-free pressurized air and generates an air
stream shaped like a cone.
The rotary mirror attachment ROT 10 can only be
used in combination with pyrometers with fixed
optics. A rotating mirror system moves the measuring
beam in a line over the measuring object with a
scanning angle up to 73°.
Air purge
Rotary mirror attachment ROT 10
Displays
Additionally to the built-in temperature indicator of
the pyrometer LumaSense offers several digital
displays which can also be used for remote
parametrizing of the pyrometer.
digital display DA 6000 LED large display
Installation Note: Strong incidence of daylight or lamp light into the view finder can
affect the measurement. In this case the ocular has to be covered.