LumaSense Technologies IGA 6/23 Advanced - Manual (Page 17)

IGA 6/23 Advanced Manual Controls and Installation · 17
RS485 Bus System
3.1.4 Connection of Additional Units
For temperature indication of the pyrometer, LumaSense offers pure indicators (series DA 4000).
LumaSense also offers indicators with features to change pyrometer parameters (DA 6000 and
DA 6000-N) as well as a fast digital PID controller PI 6000.
Digital Display Parameterizing Indicator Digital Controller
Additional analyzing instruments, including LED digital displays only need to be connected to a
power supply and the analog outputs of the pyrometer (exception: the digital display DA 6000
can also be connected with its serial interface, whereas the digital display DA 6000-N has to be
connected with its serial interface).
Connection of additional units
Other instruments like an analog controller or printer can be connected to the display in a series
as shown above (total load of resistance max. 500 Ohm).
Terminator
Pyrometer 1
e.g. Address 00
Pyrometer 2
e.g. Address 01
Pyrometer 32
e.g. Address 31