2 system operation, 1 user login, Start-up – LT Security LTD2284HMK User Manual
Page 10: System login, 2 basic working parameter, 3 environment adaptability
2.2 System Operation
2.2.1 User Login
1. START-UP
Connect the DC19V/3A adapter to DVR. When the DVR is started, 【POW】LED will be on
and 4 images will be displayed on the screen. If the DVR is setup for motion detection or time
record, the system will record automatically and the corresponding LED will be on showing the
system is working normally.
Remark: If there is no HDD in the device, or the device cannot read the HDD, it will display
a 【H】 in live view.
2. SYSTEM LOGIN
You can login from the USER LOGIN window as follow. Input device ID and user password
via numeric key-board. You can access to main menu by pressing 【Apply】if the password is
enabled.
Remark: Default device ID is: 00000, user password is oooooo and Admin password is
020818. For your convenience and system safety, you can setup the user password and change
the device ID in the Setup. Administrator has all authorities, while operator has limited authorities
to only watch and playback.
Unit ID: You just need to enter the unit ID as the right frame.
Password: enter the admin password or user password.
10