Hired-Hand Farm Hand Series: Data Shuttle - Manual (Page 10)

4801-0164 Farm Hand Data Shuttle 8
11.2 Initializing the Data Shuttle after Battery Replacement
When the battery is replaced in the Data Shuttle, the internal processor will initialize.
As soon as the battery is installed properly, the Data Shuttle will perform a special
flashing sequence to indicate that initialization was performed and the unit is operating
OK. The Data Shuttle will flash, pause one second, and then flash again. The LED will
then revert to the flashing pattern observed before the battery was replaced. Finally,
install the faceplate and properly dispose of the used battery.
12 Replacement and Optional Parts
Farm Hand Data Shuttle (16 Kbytes)…...……………………….…….……Product # 6607-1550
Farm Hand Data Shuttle (32 Kbytes)……………………………………….Product # 6607-1552
Farm Hand Data Shuttle/Computer Connector……………………………..Product # 1902-2880
Farm Hand Data Shuttle /Controller Connector…………………………….Product # 1902-2881
Farm Hand Data Shuttle Temperature Sensor/Connector…………………..Product # 6407-2595
Farm Hand Data Shuttle Battery…………………………………………….Product # 3041-5000
Data Shuttle Launch Pad Software & Cable Kit…………………………….Product # 6650-5035
13 Reference Manuals
Farm Hand Data Shuttle Owners Manual…………………………..….…Document # 4801-0164
Data Shuttle Launch Pad Software Manual……………………..………..Document # 4801-0165