Elitegroup A929 (V2.0) - Manual (Page 70)

message you are getting is from the application or the operating system.
Once you know this, you can look in the respective manual for a solution
to the problem.
Checking Cables and Connections
Start by performing a careful visual inspection of the exterior of the
computer. If no LEDs are illuminated, make sure that your computer and
its peripherals are getting power and communicating with each other properly.
To check the power cables, and connections:
If you have been using UPS power, connect the DeskNote to
an external power source and make sure that the UPS has a
charge. 1.
2.
3.
NOTE:
If you are using the DeskNote with the AC adapter, check the
power outlet, the power cord, and any power switches that
may affect your computer.
Check the wall outlet or power strip with an item that you
know is functioning properly. A lamp or radio is a convenient
item for checking the power. You may also need to check
the fuses and breakers in your electric box.
If the outlet is controlled by a wall switch, make sure that the
switch is on.
If the outlet is controlled by a dimmer switch, use a different
outlet.
If your computer is plugged into a power strip with an
On/Off switch, make sure the switch is on.
With the computer’s power switched off, check all cable
connections. If the computer is connected to any peripheral
devices, look for loose or disconnected cables. If the computer
is too close to a wall, a cable connection may be loose or the
cables may be crimped.
Do not substitute cables for different devices (other than the
manufacturer recommended cables) even if they look exactly
58