Elitegroup A929 (V2.0) User Manual
Page 44

Quick Boot
Set this option to Enabled to instruct AMIBIOS to boot quickly when the
computer is powered on.
The settings are Disabled or Enabled (default value).
1
st
Boot Device
This option sets the type of device for the first boot drives that the
AMIBIOS attempts to boot from after AMIBIOS POST completes.
The settings are Disabled, HDD (default value), CD-ROM and USB
FDD.
2
nd
Boot
Device
This option sets the type of device for the second boot drives that
AMIBIOS attempts to boot from after AMIBIOS POST completes.
The settings are Disabled, HDD, CD-ROM and USB FDD (default
value).
3
rd
Boot Device
This option sets the type of device for the third boot drives that the
AMIBOOS attempts to boot from after AMIBIOS POST completes.
The settings are Disabled, HDD, CD-ROM (default value) and USB
FDD.
S.M.A.R.T. for Hard Disks
Set this option to Enabled to permit AMIBIOS to use the SMART
(System Management System and Reporting Technologies) protocol for
reporting server system information over a network.
The settings are Enabled or Disabled (default value).
TouchPad Support
Set this option to enabled or disabled the touchpad. The default setting
is Enabled.
32