Elitegroup A929 (V2.0) - Manual (Page 47)

The settings are Disabled, 6F8h (default value), 7F8h, 7E8h or 6E8h.
IR Mode Select
This option specifies the infrared transmission method.
The settings are SIR (default value) or FIR.
IR IRQ Select
This option specifies the IR IRQ select for the IR port.
The settings are 3 (default value), 4, 5, 9, 10, 11 and 12.
IR DMA Select
This option specifies the IR DMA select for the IR port.
The settings are Disabled, 0, 1 (default value) and 3.
OnBoard Parallel Port
This option specifies the base I/O port address of the parallel port on the
motherboard.
The settings are Auto, Disabled, 378h, 278h, or 3BCh.
Parallel Port Mode
This option specifies the parallel port mode.
The settings are Normal, Bi-dir (default value), EPP or ECP.
Parallel Port IRQ
This option specifies the IRQ used by the parallel port. This is only a
display-only item and cannot be altered.
The settings are 5 or 7 (default value).
Parallel Port DMA Channel
This is only a display-only item and cannot be altered.
35