Elitegroup A929 (V2.0) - Manual (Page 53)

Installing the USB 2.0 Driver for Win2K
Please follow these instructions to install the USB 2.0 driver.
From your screen, click on the "My Computer" icon and use
your mouse or touchpad right button to select the "Properties"
item. 1.
2.
3.
4.
5.
6.
7.
NOTE:
Click on the "Hardware" tab from the "System Properties"
window.
Click on the "Device Manager" and double click the "Universal
Serial Bus (USB) Controller" (denoted by a yellow mark
symbol).
Click the "Update Driver" tab on the "Driver" item and select
the "Next".
Select the "Search for a suitable driver for my device
(recommended)" and click on the "Next" item.
Select the "Specify a location", click on the "Next" item.
Select the "Browse" button and specify for the designate
location of your CD driver.
The procedures mentioned above described if you are
installing the driver automatically to search for a suitable
driver. Another is option if you are installing the driver
manually where you select from a list of known drivers for
your system.
1.
2.
3.
4.
Repeat steps 1-4 and select the "Display a list of the know
drivers for this device so that I can choose a specific driver" and
click on the "Next" item.
Select "Other Devices" and click on the "Have Disk" tab.
From the "Upgrade Device Driver Wizard" window, select
"VIA" and "VIA PCI to USB Enhanced Host Controller" models.
Click on the "Next" item to complete the installation.
41