Elitegroup A929 (V2.0) - Manual (Page 35)

Supports CD-DA, CD-ROM mode 1 and mode 2, Multi-Session
Photo CD™, CD-I/Video CD (pcs.)
Low power consumption
12.7mm height
Precautions for Handling CD-ROM Discs
Always hold the disc by the edges, avoid touching the surface.
Use a clean, dry, cloth to remove dust, smudges, or fingerprints.
Wipe from the center outward.
Do not write or place objects on the surface of the disc.
Store discs in a cool dry place not to damage the disc.
Do not use benzene, thinners, or cleaners with detergent. Only
use CD-ROM cleaning kits.
Do not bend or drop the discs.
Loading a Disc
To play a CD disk, follow the instructions listed below.
Push the CD-ROM eject button on the CD drive door. Gently
pull the tray all the way out. 1.
2.
3.
1.
2.
3.
Carefully lift the CD disk by the edges and make sure the shiny
surface is face down (the side with no writing on it). Carefully
insert the CD disk onto the tray. Push the CD disk down
gently so that it snaps onto the center ring.
Push the tray back into the drive.
To remove a CD disk, do the following:
Check the LED display and make sure that the computer is not
accessing the CD-ROM drive.
Push the eject button and pull the tray all the way out.
Carefully pick up the CD by the edges and — while pressing
down on the center ring — remove the CD disk from the tray.
23