Brocade Mobility 1220 Access Point Installation Guide - Manual (Page 8)

Site preparation
1
Brocade Mobility 1220 Access Point Installation Guide 3
53-1002916-01
Site preparation
• Consult your site survey and network analysis reports to determine specific
equipment placement, power drops, and so on.
• Assign installation responsibility to the appropriate personnel.
• Identify and document where all installed components are located.
• Ensure adequate, dust-free ventilation to all installed equipment.
• Identify and prepare Ethernet and console port connections.
• Verify cable lengths are within the maximum allowable distances for optimal
signal transmission.
Package contents
A Mobility 1220 Access Point is available in integrated antenna and external
antenna models. Contents differ depending on the model ordered.
External antenna model package contents
• Mobility 1220 Access Point with external antenna connectors (Plenum Rated)
• 2 customer installed mounting lugs
• 4 mounting lug retaining screws
• Brocade Mobility 1220 Access Point Installation Guide (This Guide)
Internal antenna model package contents
• Mobility 1220 Access Point with internal antennas
• Brocade Mobility 1220 Access Point Installation Guide (This Guide)