Brocade Mobility 1220 Access Point Installation Guide - Manual (Page 23)

External antenna model suspended ceiling t-bar mount
2
18 Brocade Mobility 1220 Access Point Installation Guide
53-1002916-01
the unit and void the product warranty. Do not actually connect to the
power source until the cabling portion of the installation is complete.
Suspended ceiling T-bar mount procedure - using ceiling
mount hardware
The following installation uses the access point ceiling mounting kit (Part No. SCT-2)
to deploy the access point on a ceiling T-Bar.
1. If required, install and attach a Kensington security cable (customer provided)
to the unit’s lock port.
2. Remove nut from the SCT-2 kit and place assembly and screw through access
point mounting ear.
3. Place the clips from the SCT-2 ceiling mount kit over ceiling T-Bar.
4. Tighten clips using provided nuts.