Brocade Mobility 1220 Access Point Installation Guide - Manual (Page 24)

External antenna model suspended ceiling t-bar mount
2
Brocade Mobility 1220 Access Point Installation Guide 19
53-1002916-01
5. Attach an Ethernet cable from the access point to a device with an 802.3af
compatible power source or use the PWRS-14000-148R power supply to supply
power to the Mobility 1220 Access Point (once fully cabled).
6. Attach appropriate antennas to the connectors.
7. Verify the unit has power by observing the LEDs.
CAUTION
If not using an 802.3af capable device to power the Mobility 1220
Access Point, ensure only the Mobility 1220 Access Point’s designated
power supply (PWRS-14000-148R) is used to supply power to the
access point. Using an incorrectly rated power supply could damage
the unit and void the product warranty. Do not actually connect to the
power source until the cabling portion of the installation is complete.