Brocade Mobility 1220 Access Point Installation Guide - Manual (Page 32)

Initial Access Point Configuration
3
Brocade Mobility 1220 Access Point Installation Guide 27
53-1002916-01
2. Point the Web browser to the Mobility 1220 access point’s IP address (using
https://). The following login screen displays.
3. Enter the default username admin in the Username field.
4. Enter the default password admin123 in the Password field.
5. Click the Login button to load the management interface.
NOTE
When logging in for the first time, you are prompted to change the password to
enhance device security in subsequent logins.
NOTE
If you get disconnected while running the wizard, you can connect again with the
Access Point’s actual IP address (once obtained) and resume the wizard.