PreSonus FireStudio - Manual (Page 32)

CONTROLS AND CONNECTIONS
29 | PreSonus 2008
 Playback/Source 2 Tab
Selecting this tab will allow you to view your DAW playback streams in the
router matrix.
If you are in Expanded Mix Mode, this tab will be named “Source 2”. You
will be able to view DAW playback streams 1-10 and the ADAT 2 inputs.
OR
 Playback Source
OR
When the Playback tab is selected, you will see a list of your virtual DAW
outputs (DAW 1, DAW 2, etc.). Clicking on any box in the row next to each
playback channel will assign it to the output at the bottom of the column.
Remember, these DAW outputs are streaming directly from your host
application. If you wish to assign a virtual instrument or a previously
recorded track to one of these playback streams, you must first route the
output of that track in your host application. (e.g., “FireStudio DAW
Channels 1-16 and 25-26” in your DAW’s output selection translates to
“DAW 1-16 and 17-18” in the FireStudio Device window. Remember
FireStudio DAW Channels 17-24 are not accessible through the FireStudio
Device window. Rather, they are directly routed to the ADAT 2 output.)
If you are in Expanded Mix mode, you will also be able to route your ADAT
2 inputs on this tab.
 Input Source Viewer
If you assign an input to an output on the Input or Source 1 tab, this routing
will be shown in the row directly above that output.