PreSonus FireStudio - Manual (Page 31)

CONTROLS AND CONNECTIONS
28 | PreSonus 2008
Inputs and Playback-Stream Routing
Along the left side of the router matrix, there are two tabs: “Inputs” and “Playback.” When the Inputs tab is
selected, the matrix will show any inputs that have been routed. When the Playback tab is selected, you can
view your playback streams or virtual DAW outputs in the router matrix. The Router Matrix patches the
selected input or playback stream directly to the specified output.
 Inputs/Source 1 Tab
Selecting this tab will allow your to view your analog, ADAT 1, and
S/PDIF inputs in the router matrix.
If you are in Expanded Mix Mode, this tab will be named “Source 1.”
OR
 Input Source
When the Inputs tab is selected, you will see a list of your physical inputs
(Mic/Inst 1, Mic/Inst 2, etc.). Clicking on any box in the row next to each
input will assign it to the output at the bottom of that column.
 Playback Source Viewer
If you assign a playback stream to an output on the Playback or Source 2
tab, this routing will be shown in the row directly above that output.