PreSonus FireStudio - Manual (Page 22)

GETTING STARTED
19 | PreSonus 2008
The Main Output as a Cue Mix
It is possible to designate the main output in Audio I/O Setup as a cue mix. This is helpful if you often record
yourself require quick access to zero-latency monitoring for live inputs. When the main output is designated
as a cue mix, a Zero Latency button will appear on any audio channel with an assigned audio input in the
Console, below the Mute, Solo, Record, and Monitor buttons.
With the Zero Latency button and Monitor Enable both engaged, you will hear the live zero-latency input
straight from your FireStudio (as opposed to through software). As such, you will no longer hear the effects
of any inserts on the channel. However, you will still hear the result of any sends on the channel, as Bus and
FX Channels will still output normally.