MAHLE RTI RHS980C - Manual (Page 40)

39
PRINTER MAINTENANCE
(Optional Item)
The printer paper will require replacement and can be
accessed on the rear of the RHS980C.
Paper is 58MM Wide X 45MM Diameter Thermal
paper and can be found at most local office supply
retailers. Replacement paper is available from RTI.
Order Kit: 360 82218 00
Press the door release button to open cover as shown.
Insert the paper with about 5mm of paper outside the
printer.
Close cover door. Light will indicate Green when
printer is ready.
REFRIGERANT IDENTIFIER
MAINTENANCE
(Optional Item)
A reported high concentration of air by the identifier
can be caused by any of the following:
 No refrigerant in the vehicle A/C system.
 Gross leak in vehicle A/C system.
 Refrigerant identifier coupler not properly connected
during sampling operation.
 Pinched, plugged or oil clogged sample hose. Oil
contaminated sample hose must be replaced,
order kit listed below
 Coupler o-ring damaged or missing, order kit listed
below.
Order Kit: 360 82219 00
UPDATING PROGRAM AND
LANGUAGES
The RHS980C has the capability to easily update
program functionality and languages. This is
accomplished by inserting a programmed flash drive
into the USB slot in the rear of the unit and cycling
power OFF and ON.
L O A D I N G U P D A T E
If languages are loading, the following message will
display.
C H E C K I N G F O R N E W
L A N G U A G E F I L E O N
F L A S H D R I V E . . .
P L E A S E W A I T
Door Release Button
Flash
Drive
Check hose for oil or UV dye for contamination.
Replace hose and coupler if contaminated.